|
Mp5
Nov 24, 2006 16:11:17 GMT -5
Post by corbin on Nov 24, 2006 16:11:17 GMT -5
|
|
|
Mp5
Nov 24, 2006 16:28:10 GMT -5
Post by Ferratus-Command on Nov 24, 2006 16:28:10 GMT -5
|
|
|
Mp5
Nov 24, 2006 17:10:38 GMT -5
Post by corbin on Nov 24, 2006 17:10:38 GMT -5
Lol that must suck, but ill just order from them and he can just leave it apart cause i should order it very soon.
|
|
|
Mp5
Nov 24, 2006 20:02:45 GMT -5
Post by Ferratus-Command on Nov 24, 2006 20:02:45 GMT -5
Well I figured either you could get the part or I would sometime this winter and try and fix it. Otherwise it is worth about as much as a paper weight.
It is just a matter of getting that part and giving it a try. I am just a slight broke at the minute with Christmas coming up and everything. Otherwise I would have already ordered it.
|
|
|
Mp5
Nov 25, 2006 13:52:56 GMT -5
Post by corbin on Nov 25, 2006 13:52:56 GMT -5
Hey Matt if i buy shims and metal bushings do you think Dave could install them for me.
|
|
|
Mp5
Nov 25, 2006 18:07:06 GMT -5
Post by Ferratus-Command on Nov 25, 2006 18:07:06 GMT -5
OOOO I will have to talk to him about the bushings. If everything is TM compatible it should be np but I will talk to him.
|
|
|
Mp5
Nov 26, 2006 20:23:31 GMT -5
Post by corbin on Nov 26, 2006 20:23:31 GMT -5
|
|
|
Mp5
Nov 27, 2006 2:55:13 GMT -5
Post by Ferratus-Command on Nov 27, 2006 2:55:13 GMT -5
I clicked that link it said basket it empty.
|
|
|
Mp5
Nov 27, 2006 6:39:01 GMT -5
Post by corbin on Nov 27, 2006 6:39:01 GMT -5
|
|
|
Mp5
Nov 27, 2006 16:09:36 GMT -5
Post by Ferratus-Command on Nov 27, 2006 16:09:36 GMT -5
Ok got it. I think it could be done. ( IF EVERYTHING is TM compatible with your gun ) that is the main question. Do you have a link of your gun itself. Exactly the one you bought. Also I would back down to this spring www.evike.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=W&Product_Code=Parts_STMA_M100&Category_Code=UP_SPRING_SPRINGGUIDEthe reason is the clones may or may not be a strong enough mech box to hold such force as yours. I asked for one for Christmas for my CM028-S but I wont go any higher than that just because Dave had an ICS Mp5 Airsoft Elite version and the gearbox ended up cracking with an M120 spring. It is unclear whether it was the spring that caused it or if something else caused it but it something to think about when dealing with a TM cloned weapon.
|
|
|
Mp5
Nov 27, 2006 16:20:47 GMT -5
Post by corbin on Nov 27, 2006 16:20:47 GMT -5
|
|
|
Mp5
Nov 27, 2006 16:22:47 GMT -5
Post by corbin on Nov 27, 2006 16:22:47 GMT -5
|
|
|
Mp5
Nov 27, 2006 22:35:42 GMT -5
Post by Ferratus-Command on Nov 27, 2006 22:35:42 GMT -5
I would not be afraid to try that gearbox with that spring...
|
|
|
Mp5
Nov 30, 2006 19:17:25 GMT -5
Post by corbin on Nov 30, 2006 19:17:25 GMT -5
I finally ordered the parts i didnt get the spring just the switch assembly and bushings and shims.
|
|
|
Mp5
Nov 30, 2006 19:31:38 GMT -5
Post by bboymax11 on Nov 30, 2006 19:31:38 GMT -5
One thing I would also put in is a Spring Guide with Ball Bearings. Ball Bearings will decrease the stress on the gearbox. Just remember there are other ways to increase your accuracy and FPS other than putting a high tension spring.
|
|