|
Post by greatrazer on Nov 11, 2009 22:25:46 GMT -5
ok so i bought a utg m14 from airsplat at the beginning of the summer....first day it broke...sent it in and after 2 months of yelling at people over the phone it comes back and has a bad battery...i bought a new battery used it for one match and now it won't shoot with any battery i use for it...i've tried replacing the fuses and im kinda new to this stuff...anything anybody might know about my problem is helpful.
|
|
|
Post by Koyote on Nov 12, 2009 0:37:42 GMT -5
Airsplat is proably the worst place you can buy from...as you found out.
As for your M14 we need a little info does it make any sounds when you pull the trigger? Sounds like the trigger switch has went out on you.
|
|
|
Post by Sliverpix on Nov 12, 2009 19:04:01 GMT -5
As for your M14 we need a little info does it make any sounds when you pull the trigger? Sounds like the trigger switch has went out on you. If not the trigger switch, check the wiring from the battery to the motor. might just be a wire issue.
|
|
|
Post by gasgunner- Command on Nov 13, 2009 17:21:26 GMT -5
did ya check the fuse??? check to see if youre getting power to the motor, if not, then go backwards til you find where there is power and why its not goin where it should... and, i have a G&G M14 and i believe im starting to have trigger switch issues... so dont rule that out yet... i havent got to checking my problem out yet...
|
|
|
Post by greatrazer on Nov 16, 2009 14:59:28 GMT -5
i changed the fuse and it still didn't work and the gun doesn't make a sound when i pull the trigger. It's strange it just stopped working period there was no warning...
|
|
|
Post by Ferratus-Command on Nov 16, 2009 16:40:02 GMT -5
i changed the fuse and it still didn't work and the gun doesn't make a sound when i pull the trigger. It's strange it just stopped working period there was no warning... The fuse/battery/ motor connections is where you want to start ... then work your way to the more expensive fixes...
|
|
|
Post by gasgunner- Command on Nov 16, 2009 17:37:20 GMT -5
yea... id check to see if your getting power to the motor when you pull the trigger... use a test light on the terminals on the motor to see if you have "juice".... make sure you have elec. goin thru the battery connector, then on the other side of the fuse... if thats good, then check the elec. at the motor... the trigger switch could be getting juice but not sending it to the motor...
|
|
|
Post by greatrazer on Dec 16, 2009 21:56:27 GMT -5
ok...the gun works now ....i had a buddy look at it and it started working after he took it apart....annoying considering i just bought a new gun but hey wtf ever now i have 2
|
|