Hauser
BB Scar Veteran
Posts: 257
|
TM MP5
Dec 22, 2010 20:46:26 GMT -5
Post by Hauser on Dec 22, 2010 20:46:26 GMT -5
hey i got a tm mp5k and if i got a m130 spring could some one put it in for me?
|
|
|
TM MP5
Dec 22, 2010 22:58:04 GMT -5
Post by Koyote on Dec 22, 2010 22:58:04 GMT -5
I wouldn't suggest puting a 130 spring in that gun...because you'll more then likly have too replace the motor aswell because I bet that gun won't even pull back a 120.
|
|
Hauser
BB Scar Veteran
Posts: 257
|
TM MP5
Dec 23, 2010 9:43:00 GMT -5
Post by Hauser on Dec 23, 2010 9:43:00 GMT -5
ahhh i so i would be putting more cash in to it blah i was not planing on that thanks
|
|
|
TM MP5
Dec 23, 2010 17:48:06 GMT -5
Post by gasgunner- Command on Dec 23, 2010 17:48:06 GMT -5
TM guns are good guns.... BUT, the are very weak by U.S. standards..... thats why we suggest buying a JG or something like that.... cheap and usualy shoot around 380 to 400 fps out of the box.... heck, even used [JG] guns are good
|
|
Hauser
BB Scar Veteran
Posts: 257
|
TM MP5
Dec 24, 2010 17:23:46 GMT -5
Post by Hauser on Dec 24, 2010 17:23:46 GMT -5
yea i know i dont have have e1 anymore i tread it with for an jg m4
|
|
|
TM MP5
Dec 24, 2010 22:06:09 GMT -5
Post by gasgunner- Command on Dec 24, 2010 22:06:09 GMT -5
how fast does the JG ya got shoot?
|
|
|
TM MP5
Dec 24, 2010 23:50:18 GMT -5
Post by Koyote on Dec 24, 2010 23:50:18 GMT -5
A person doesn't really need a gun that shoots over 400 fps...thats what you'd be looking at if you got a 130 because thats what I run in my ptw. All you really need is around 370-390 fps and a good hop up...the way I look at it is these guns come from the factory with the gear box built to there limits I see no point in upgradeing really because you'll end up putting more money into the guns because of the extra stress it's put under.
|
|
Hauser
BB Scar Veteran
Posts: 257
|
TM MP5
Dec 25, 2010 9:06:08 GMT -5
Post by Hauser on Dec 25, 2010 9:06:08 GMT -5
All you really need is around 370-390 fps and a good hop up... Whats your def. of a good hop up? (The guns fps is 380-390.)
|
|
|
TM MP5
Dec 25, 2010 10:05:40 GMT -5
Post by Koyote on Dec 25, 2010 10:05:40 GMT -5
I'd suggest an SRC hop up PB sports should have them there around $3.00
|
|
|
TM MP5
Dec 25, 2010 19:37:04 GMT -5
Post by gasgunner- Command on Dec 25, 2010 19:37:04 GMT -5
yep.... i agree with koyote.... basicly, just a bucking will do [rubber thing that goes on barrel, inside the hop up]... i wouldnt worry about it too much, unless youre having issues with the adjustability of the hop up ya got right now... wait til something happens, then swap it out.... you can go ahead and get the parts now, if youre going to go inside to do that, why not get a tight bore barrel.... it would help accuracy, and it bumps up fps just a little bit... id get a new hop up, bucking, and barrel... then swap it out as a whole unit.. keep the stock one for a back up... its easy to swap out the whole assy, than to just do a bucking out in the field... M4's are pretty easy to do.... that MP5 is a pain in the behind... all of my guns have them... and they are all shootin 380 - 400fps...
|
|
Hauser
BB Scar Veteran
Posts: 257
|
TM MP5
Sept 25, 2011 19:22:46 GMT -5
Post by Hauser on Sept 25, 2011 19:22:46 GMT -5
I'd suggest an SRC hop up PB sports should have them there around $3.00 oh wow this took a lot of time well i forgot about it haha but kyle i went there at the time and dont sell them any more
|
|