|
Post by wildman on Jan 27, 2008 13:26:29 GMT -5
I posted this last night on ASR and have not gotten any real help from anyone. I am turning to you guys =0)
Ok, I need your help. I recently (tonight) switched all of my batteries and guns over to Dean's plugs. While working on the TSD G36 I switched one of the wires. When I plugged in the battery, nothing happened (obviously). Once I noticed what I did, I took things back apart and switched it to the correct set up. Once I did that I plugged the battery back in and shot a few rounds in semi and full. I unplugged the battery and put things back together. Once I did that and plugged in the battery, I got nothing. Even after taking things back apart I get nothing. Any ideas? Could I have shorted out the trigger switch? But then why would it work for a few shots and then not again? I need help guys!!! Thanks in advance...
(the battery and fuse are ok)
|
|
|
Post by Ferratus-Command on Jan 27, 2008 13:41:14 GMT -5
I posted this last night on ASR and have not gotten any real help from anyone. I am turning to you guys =0) Ok, I need your help. I recently (tonight) switched all of my batteries and guns over to Dean's plugs. While working on the TSD G36 I switched one of the wires. When I plugged in the battery, nothing happened (obviously). Once I noticed what I did, I took things back apart and switched it to the correct set up. Once I did that I plugged the battery back in and shot a few rounds in semi and full. I unplugged the battery and put things back together. Once I did that and plugged in the battery, I got nothing. Even after taking things back apart I get nothing. Any ideas? Could I have shorted out the trigger switch? But then why would it work for a few shots and then not again? I need help guys!!! Thanks in advance... (the battery and fuse are ok) I doubt you shorted out the trigger mech. Sounds like ( Operative word being sounds ) you may have a short on the mech box . I will have dave read this when he gets here and see what he comes up with.
|
|
|
Post by wildman on Jan 27, 2008 13:44:18 GMT -5
So would that involve taking it apart and checking for any burnt wires?
|
|
|
Post by Ferratus-Command on Jan 27, 2008 17:46:01 GMT -5
I would take it apart and check for any burnt or exposed wires.Also check the inline fuse and for any solder joints that may have come apart.
|
|
|
Post by Ferratus-Command on Jan 27, 2008 18:21:10 GMT -5
I would take it apart and check for any burnt or exposed wires.Also check the inline fuse and for any solder joints that may have come apart. That was dave as he does not have an account. He also said that without actually looking at it there is not much he can think of.
|
|
|
Post by wildman on Jan 27, 2008 20:00:08 GMT -5
I will check everything over really good tomorrow. If I cannot find anything, I may need to have him look at it for me. Thanks!!!
|
|
|
Post by wildman on Jan 28, 2008 20:26:00 GMT -5
Well, I checked all the wiring and it seems to be fine. So that leaves me with the motor being bad or the switch being bad. I am guessing. I would think that it is something with the switch since the motor is not even trying to do anything. Unless it is burned up.
|
|
|
Post by Ferratus-Command on Jan 29, 2008 9:01:02 GMT -5
Well, I checked all the wiring and it seems to be fine. So that leaves me with the motor being bad or the switch being bad. I am guessing. I would think that it is something with the switch since the motor is not even trying to do anything. Unless it is burned up. What he told me was that if you somehow had accidently reversed the wires the motor would try to go well reverse. Problem with that is that the anti-reverse latch would stop it from doing such there by possibly causing to burn up.. IF that is the case.
|
|
|
Post by wildman on Jan 29, 2008 9:31:56 GMT -5
I was thinking the same thing. I am out of a job right now, so a new motor will have to wait. I think I will do some other stuff to it as well, once the funds come in.
|
|
|
Post by Ferratus-Command on Jan 29, 2008 12:01:34 GMT -5
I was thinking the same thing. I am out of a job right now, so a new motor will have to wait. I think I will do some other stuff to it as well, once the funds come in. I feel your pain about money.. If you get with Dave he may have an extra one you could pay him later for but I am not sure.
|
|
|
Post by wowposter on Sept 9, 2008 22:30:39 GMT -5
|
|