|
Post by Boyscout on Aug 26, 2012 16:06:38 GMT -5
PDI Precision Cylinder Set HD- will help gun to get to 100% compression
PDI 140% Spring- FPS around 380-390 (1.4J) with 100% compression
Laylax 6.03 TBB (303mm)- better accuracy, only barrel left in stock in US currently for G-Spec
Dangerwerx Type A/B hop arm- CNC machined hop arm that increases hop-up capability
Nineball bucking- for use as a backup bucking, better airseal
Nut & Bolt- to make a TDC (top dead center) mod that takes away the classic right hook of Vsr-10 rifles and gives unlimited amount of hop.
Laylax Zero Trigger- already got it, but one of the best triggers out there
I doubt I will have a perfect 100% compression but I hope I can get as colse as possible to it. I still need to work on estimating range of targets. I know the Mil-dot equation for range estimation just dont think its very practical for airsoft.
|
|
|
Post by predatorryu on Aug 26, 2012 20:49:01 GMT -5
Wait so do you have all the upgrades i installed already or is this just a list of stuff you plan on doing?
|
|
|
Post by Boyscout on Aug 27, 2012 6:04:25 GMT -5
I only have the Laylax Zero Trigger right now. Working on getting the rest of the stuff. Also Airsoft Atlanta is having a 30% off all PDI products sale along with another 20% clearance sale. So I can get PDI stuff for 50% off. Lasts until Aug. 31.
|
|
|
Post by Boyscout on Dec 13, 2012 21:37:54 GMT -5
Its been awhile since I posted to this thread but I now have new parts on the way that will be here monday and I'll be finishing the upgrades on my VSR-10. On Monday the VSR-10 will have these upgrades: Laylax Zero Trigger PDI Precision Cylinder Set (Cylinder, Spring Guide, Hard Piston, Tapered Cylinder Head) PDI SPR 250% Spring Firefly Bucking
To do/buy list: TDC (Top Dead Center) Mod Laylax 6.03 TBB DIY Barrel spacers
Shold be 100% finished by spring. FPS should be around 490-500. And range will hopefully be 200+ft.
|
|
|
Post by Slacker - Command on Dec 13, 2012 21:59:36 GMT -5
Save your money on the barrel spacers Wrap tape around the inner barrel in a consecutive spiral motion down the length to the dished thickness. This gives more overall support. Been reading up on dmrs and sniper guns. Seems to be the easier more effective way.
|
|
|
Post by Boyscout on Dec 14, 2012 7:08:29 GMT -5
Thats what I planned on doing. I've read about all types of barrel spacers and a single spacer that goes the length of the barrel was usually considered the best on the fourms I read.
|
|
|
Post by Gangnail-Command on Dec 14, 2012 19:19:41 GMT -5
what? No r-hop up?
|
|
|
Post by Boyscout on Dec 14, 2012 20:36:29 GMT -5
R-Hop was made for AEG rifles. VSR-10 rifles dont use the same barrels or buckings that AEGs use.
|
|
|
Post by jackrabbit89 on Dec 26, 2012 15:59:24 GMT -5
watch your self on that tape lol you do that and it will be a pain in the butt if you ever decide to get a new inner barrel for it
|
|
|
Post by Slacker - Command on Dec 29, 2012 9:05:37 GMT -5
Not sure what you mean by the tape mod rabbit. You just snug the inner barrel against the outer barrel.
|
|
|
Post by jackrabbit89 on Dec 30, 2012 13:44:42 GMT -5
mathew the kid that got his guns on ebay bought on and tried to switch the barrel out and the thing wouldnt budge, the previous owner teflon taped it in there, i thought that was wat you wer talkin about lol
|
|
|
Post by jackrabbit89 on Dec 30, 2012 13:51:27 GMT -5
and i found online that you can use wax to as a barrel spacer you jusneed a thread adapter and the wax. you melt the wax down and pour it into the outer barrel around the inner barrel, center the inner barrel throw the thread adapter over it and screw it in to hold the barrel center and the wax hardens around it makin a prefect barrel spacer. kinda only works if the inner barrel protrudes from the end of the outer barrel. just somethin i thought was cool
|
|
|
Post by Darth on Dec 30, 2012 18:53:53 GMT -5
and i found online that you can use wax to as a barrel spacer you jusneed a thread adapter and the wax. you melt the wax down and pour it into the outer barrel around the inner barrel, center the inner barrel throw the thread adapter over it and screw it in to hold the barrel center and the wax hardens around it makin a prefect barrel spacer. kinda only works if the inner barrel protrudes from the end of the outer barrel. just somethin i thought was cool I did that wax spacer thing with my Asr. It didn't do much good.
|
|
|
Post by jackrabbit89 on Jan 6, 2013 4:53:59 GMT -5
did the wax just break apart or what?
|
|
|
Post by Darth on Jan 6, 2013 8:21:52 GMT -5
No it was just a huge hassle for not much gain. And when I had to change something in the hop unit it was a big behind pain to get that wax out.
|
|