|
Post by Slacker - Command on Jan 14, 2013 22:28:53 GMT -5
g&g green comes and goes from most sites. I bought mine from cromag originally talk to him. Bonus you can drive there or have it delivered in no time flat. Got mine in three days.
|
|
|
Post by jackrabbit89 on Jan 15, 2013 21:12:54 GMT -5
sweet i didnt think of him, ill check it out, thanks
|
|
|
Post by Slacker - Command on Jan 15, 2013 23:19:34 GMT -5
np
|
|
|
Post by jackrabbit89 on Jan 16, 2013 21:18:03 GMT -5
can you use he green bucking on any aeg? or is it only certain ones?
|
|
|
Post by Slacker - Command on Jan 16, 2013 21:31:02 GMT -5
any one that accepts aeg parts as standard.
|
|
|
Post by jackrabbit89 on Jan 16, 2013 21:45:16 GMT -5
k found them on crazy cromags im orderin one for each of my guns, and i was wonderin the sniper barrel i am gettin is aeg and and the hop unit i gettin is a pdi hop that accepts aeg barrels, been havin trouble findin the buckin i want for it, will it work in a sniper rifle hop unit if it runs an aeg barrel
|
|
|
Post by jackrabbit89 on Jan 19, 2013 15:48:19 GMT -5
k i think i got everything i want to put into the p90 chosen had to make some revisions cus some things went out of stock and couldn't find them. but here it is
evike parts : AIM Tornado Infinity Speed Gear Set w/ Piston for Airsoft AEG Rifles
AIM High Performance Airsoft AEG Tornado Speed-Up Motor (Long Type)
Matrix 7.4V 20C 2000mAh Li-Po Battery Pack (Small Type) (102mm x 35mm)
ASG Ultimate Steel Cylinder for Airsoft AEG (Suitable for Inner Barrel 240~300mm)
Matrix Airsoft AEG Mushroom Type Silent Ball Bearing Shock Reduction Piston Head
Matrix Ultra Precision Gun Smith Airsoft AEG Gearbox Shim Set (40 pcs)
Angel Custom P90 High Speed Stock Extension w/ Sling Mounting Point
New Version Mad Bull Airsoft Black Python 6.03mm Tight Bore Inner AEG Barrel. (247mm) and an m95 matrix spring
crazy cromags part: g&g green bucking
i am hopin to have it before the week before the kalamazoo game , and was hopin to have it in before the game and was wonderin if i could get some help from someone a little more experienced then me to put it all in, if they want i can pay whoever wants to do it. and if anyone see anything that wont work in that setup let me know please cus again im not all that experienced at upgrading gear boxes lol thanks
|
|
|
Post by Renegade on Jan 19, 2013 17:37:33 GMT -5
Gear Set w/ Piston: Never used the gears, or really read about them. However, using a full metal tooth piston is not the best idea. If your piston for any reason were to break, then it is going to take out your gears out as well. I'm more a fan of poly carbonate piston w/ 3 or so metal teeth (usually the release tooth at least). Make sure you get the right gearset compatibility. Motor: Again, never really heard of it. Probably a rebrand, but not sure who they rebranded. Cylinder: Is there really a need for this? Check to see if your cylinder has a similar air slots in it. Based on this review ( www.airsoftretreat.com/forums/index.php?topic=73103.0 ) it already has an air slot in it. Piston Head: I suggest just a regular piston head. The silent ones are just a gimmick. Judging by the same review, the stock E90 does have an aluminum piston head. I prefer polycarbonate for less force hitting the front end of your gearbox every time you fire. Although the Version 6 gearbox is quite strong. I do suggest a #14 O-Ring from your local hardware store & replace the stock O-ring. Take the #14 & put it over your cylinder. This will get it to stretch & make for a better seal before putting it in. Total cost: maybe a quarter. Spring Guide: Judging by the review again, it looks like a plastic spring guide. I suggest a metal one. Shims: I went cheap once & bought Modify shims. Worst. Choice. Ever. Spent 3 days trying to shim my geabox before noticeing they were very warped. I haven't used Matrix, but they do rebrand... G&P is decent for the price, but are made of copper. This could lead to them wearing down faster than the stainless steel. Inner Barrel & bucking: Good choice. Spring: Be cautious, as Matrix is a rebrander. They could possibly rebrand ACM (all china made) springs which could shoot alot hotter than advertised. Battery: I don't see a lipo battery charger on your list. Make sure to read up on lipos. "Don't risk using a RC car lipoly battery that is not intended for Airsoft." Really, Evike? They are the same thing... For instance here is a similar product for $7: www.hobbyking.com/hobbyking/store/__17291__Turnigy_nano_tech_1800mah_2S_20_40C_Lipo_AIRSOFT_Pack.html I haven't bought from these guys before, so I don't know how long it would take to get to you. Nor do I know if it would fit in the P90 (although it is similar in dimension to the one you linked.) www.airsoftforum.com's upgrade section. Also, www.airsoftmechanics.com can be good resources to read up on reviews on those parts. Again, do your research before you buy any part (besides maybe the barrel & bucking). By the way, Kalamazoo is semi only indoors. Unless you have burst by a MOSFET. You can use full auto outside though.
|
|
|
Post by jackrabbit89 on Jan 19, 2013 20:01:29 GMT -5
thanks dude that site was a total break down of the e90 lol there is a lot of stuff i woulda wasted my money on like that cylinder. and i got a lipo already in the ak so im good on those knowledge wise. but im thinkin of lookin at that other battery for 7 though. and actually i think those gears may come with a spring guide in it. the piston i may just take the gamble on cause it comes with the gears and i dont want to add another 45 bucks to the bill for a replacement. maybe down the road a little for that. the piston head i may pick a different one cus i been readin reviews and gettin mixed emotions on that but idk for sure yet. thanks agian dude you helped alot with this. there is alot more that goes into makin these d'mn things then i thought.
|
|
|
Post by jackrabbit89 on Jan 19, 2013 20:06:11 GMT -5
i think i may pick up just the barrel buckin battery and stock ext for right now and use the m4 at kalamazoo for now, i want to get this gun right cus from wat i seen these e90 can be all kinds of effective in a skirmish with the right parts.
|
|
|
Post by Slacker - Command on Jan 20, 2013 11:07:16 GMT -5
thank you renegade. Never looked much into p90s. And with college my free time is severely wasted.
|
|
|
Post by jackrabbit89 on Jan 21, 2013 21:31:23 GMT -5
i know the air nozzle and tappet plate are kinda cheap plastic on the e90, should i replace these for a high speed setup or will they be able to take the beating? if its not needed i am gona take them off the list for now.
|
|
|
Post by jackrabbit89 on Jan 21, 2013 21:48:38 GMT -5
and i am thinkin of buy a sorbo pad for the cylinder head, it says that it can help prolong the life of the piston and cylinder head, what are your thoughts on sorbo pad, good/bad and i know which one should fit my piston but how do you know what thickness and hardness to use?
|
|
|
Post by Darth on Jan 22, 2013 8:50:01 GMT -5
If u get one of those Sorbo pads u have to remove a tooth from your piston. That way the angle of engagement is correct.
|
|
|
Post by jackrabbit89 on Jan 22, 2013 19:31:49 GMT -5
would it really be worth the work and time to get it then ?
|
|