|
Post by Darth on Jan 23, 2013 8:10:15 GMT -5
I would say it is worth it. The Sorbo is there to dampen the shock of the piston slamming into the front of the gb. And as a person that has cracked the front of a gb off. It would be worth the work.
|
|
|
Post by jackrabbit89 on Jan 23, 2013 17:04:17 GMT -5
k thanks.
|
|
|
Post by jackrabbit89 on Jan 23, 2013 17:42:00 GMT -5
|
|
|
Post by Gangnail-Command on Jan 23, 2013 23:05:42 GMT -5
|
|
|
Post by jackrabbit89 on Jan 24, 2013 8:27:31 GMT -5
gang the mosfet you have in your gun, is that chip all you have to get or do you need a whole new wire set ? the ones i am seeing online have a whole new wire set with them but they also have this little chip.
|
|
|
Post by Darth on Jan 24, 2013 8:58:48 GMT -5
I think they have them that just plug in to the batt connection. No rewire at all.
|
|
|
Post by jackrabbit89 on Jan 24, 2013 9:46:02 GMT -5
k i think that is what i found i posted a link to it a few posts back, i think it just goes to the battery but wasnt sure, thanks
|
|
|
Post by Gangnail-Command on Jan 25, 2013 4:30:25 GMT -5
|
|
|
Post by jackrabbit89 on Jan 26, 2013 3:12:56 GMT -5
sweet ill give it a try. thanks and wat ya lookin to get for it, i plan on switchin all my guns to lipo anyways so that is perfect
|
|
|
Post by jackrabbit89 on Jan 26, 2013 18:01:49 GMT -5
well got a start to the upgrading today, got the g&g green bucking for all my guns today and should have alot more in the next comin weeks, hoping to have the p90 done by kalamazoo, btw if anyone has a rather long flash hider that will fit an ak, im looking to buy one. got a tight bore for it that is just a bit to long, got about 2.5 inches of exposed barrel.
|
|
|
Post by Koyote on Jan 26, 2013 20:17:31 GMT -5
well got a start to the upgrading today, got the g&g green bucking for all my guns today and should have alot more in the next comin weeks, hoping to have the p90 done by kalamazoo, btw if anyone has a rather long flash hider that will fit an ak, im looking to buy one. got a tight bore for it that is just a bit to long, got about 2.5 inches of exposed barrel. www.airsoftgi.com/product_info.php?cPath=30_304&products_id=3730 this should work
|
|
|
Post by jackrabbit89 on Jan 27, 2013 4:44:11 GMT -5
i been wantin one of those but i dont know if it will work with that actually, on the ak i want to put it on the front sight post has a small pin that comes out the front of it that is right over the threads, i think it helps hold the sight post on but idk, i was gona just grind it of but i dont want to take my sight with it. its the echo1 ak cpw, if i could get the pin out the way i actually would get it.
|
|
|
Post by jackrabbit89 on Feb 16, 2013 18:00:24 GMT -5
k got the first of my upgrades for my guns, got the green buckins in the mail yesterday, got one installed in the e90 and i love it, and i got tight bores for the ak and the m4. the ak tight bore is 550mm yea its a bit long but i got the silencer for it to hopefully it works. got the barrel for free so i aint complainin lol and the m4 barrel is around 400 to 450 i think again hopefully it works lol. was wonderin if any of you know your way aroun echo1 ak's and ics m4 just incase i cant stumble my way through this stuff. i was able to figure out the e90 but those are easy guns to work on. the ak's and m4's are a different monster to me lol
|
|
|
Post by Darth on Feb 16, 2013 18:56:24 GMT -5
Barrel swaps are about as easy as they go. Just make sure u turn off the hop up. And with the ics make sure after u remove the c clip u flip the unit over. Then slowly pull it out.
|
|
rabidgerbil
6mm Magnet
All you truly need to play airsoft is honor, everything else is just toyz.
Posts: 64
|
Post by rabidgerbil on Feb 17, 2013 9:36:48 GMT -5
|
|