|
Post by weaver on Jan 20, 2013 17:30:35 GMT -5
Need sujestions for a wicked high speed long shaft motor... price does not matter. Willbe using a 11.1 lipo. Any sujestions?
|
|
|
Post by jackrabbit89 on Jan 21, 2013 21:25:04 GMT -5
i been lookin for the same thing and from wat iv seen the systems az high speed is really nice, also the AIM tornado high speed motor is also nice, on average from wat i heard they both get about 40,000 rpm's compared to most other motors 35,000 like the matrix brands. both about 45 dollars i think on evike
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Jan 21, 2013 23:48:39 GMT -5
G&p motors are amazing and shs high speeds are insane.
|
|
|
Post by Gangnail-Command on Jan 22, 2013 4:17:32 GMT -5
There is a LOT more than just a motor in high speed set up's. What type of gun? Gears? piston? spring? MOSFET? I suggest doing some reading on airsoftmechanics.com (they have some great n00b friendly high speed advice)
|
|
|
Post by Koyote on Jan 22, 2013 11:10:33 GMT -5
Here's the thing about having a gun with a high ROF. It's kinda pointless think about it I mean your going to be going throught ammo like it's nothing, your going to be wearing out your gun much quicker. If you really want something to be an advantage i'd suggest looking into a mosfet and improve trigger response. But thats just me.
|
|
|
Post by weaver on Jan 22, 2013 14:14:23 GMT -5
Thanks everyone in your input. I have a sr25 with all the fixings even has a ascu mosfet. But my m4 is shooting to hot and want to tone it down so I can take it to other fields and not have a problem with fps which is why I want to raise the rof. I have a shs ht motar that I like and was thinking of the same motar but in high speed. So just going to start with a good high speed motar and go from there. But having trouble and what motar to get lol
|
|
rabidgerbil
6mm Magnet
All you truly need to play airsoft is honor, everything else is just toyz.
Posts: 64
|
Post by rabidgerbil on Jan 27, 2013 8:40:40 GMT -5
I would have to agree with Koyote on this hands down. Another thing you have to look at is accuracy. Decent rof is good, but insane rof accuracy goes down the toilet. Only time I would recommend above standard rof is in a "support weapon" where accuracy is not in high demand.
The SHS HT motor is plenty fast enough but the draw back to it is amps......it pulls alot more power than other motors. (Shortens battery life) G&P120 is a fantastic motor when coupled with a 7.4 lipo. Amp HT has been another one I have used with good results.
Bigger demands on the gearbox and shortening the life of it does nothing but cost you $$$. What make of M4 are you using?
|
|
|
Post by weaver on Jan 27, 2013 19:59:51 GMT -5
I have a ca full metal m4 uac x series. Only thing I've done to it is a better air nozzle and upgraded hop-up nub and tight bore barrel and running a 11.1 lipo. I have the rifle I want for distance but now onto a bullet hose. Short distance is not a concern nor working on the gear box to keep it up and spraying! I believe the heart of an aeg airsoft gun is its motor, so I thought I would just get some imput from you men and ladies on a sweet high speed motor in the 40,000 rpm range or greater?
|
|