blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 6, 2013 16:47:23 GMT -5
so i got it today! pretty standerd stuff tho when i opened it the mag was laying on the gun>_< luckily didnt scratch anything. i cleaned it as suppose to and really worried about trying to adjust my hop upD: any tips? but other then that im pretty satisfied! im more of a G&P fan but the lm4 was something i wanted badly
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 6, 2013 18:12:29 GMT -5
also im having problems loading the bbs in the pmag.the speed loader is either retarted or i am lol
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 6, 2013 18:33:50 GMT -5
the plunger hole that goes on bb follower is to small to have bbs go through
|
|
|
Post by Koyote on Feb 6, 2013 20:32:36 GMT -5
Load them by hand.
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 6, 2013 20:57:08 GMT -5
yeah thats what im doing til i go to walmart its just a pain when i hit around 15 bbs and i only have one mag i dont wanna do that during combat lol but itl do!
|
|
|
Post by Darth on Feb 6, 2013 23:16:08 GMT -5
It will load them. Just put the speed loader on top. Fill to the top and ram the rod down. Make sure you do not use spray silicone. Get some RC shock oil. 30w.
|
|
|
Post by Darth on Feb 6, 2013 23:18:36 GMT -5
Also with the hop up adjustment. It isn't that hard just make sure the teeth of the key and the hop line up. And don't crank it. It will have small clicks.
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 7, 2013 0:32:07 GMT -5
Im serious the hole was made to small bbs get stuck i trired fliping and using other side didnt work lol also i hated the spring noise everytime it shoy so i got rid of that noise lol real simple took me 5 seconds
|
|
|
Post by Darth on Feb 7, 2013 7:12:15 GMT -5
The spring noise is supposed to be there. And how exactly did u get rid of it? I'm confused on how u r trying to load the speed loader. It should only go on the mag one way.
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 7, 2013 7:29:15 GMT -5
Yeah i know just annoyed me i watch alot of gekko actual on youtube which he does mods to lm4 without hurting it and make gun better etc. but you take atleast 3 coils in the middle and uncoil them very little if to much there will be buffer jams it will not harm gun in any if done right. . Yes the hole on the plunger that goes on the mag is to small for bbs to go thriugh it gets stuck. The part that sludes onto top of feed lip bb follower
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 7, 2013 7:35:32 GMT -5
|
|
|
Post by Darth on Feb 7, 2013 7:49:40 GMT -5
Yeah I have done the spring mod. But just so u know KWA will not fix your gun now. Since you have made internal modifications. And if the speed loader hole is to small can't u just drill it out a little. It should only be 6mm. Make sure that whatever u do do not over fill the mag with bbs. It will cause a really hard jam. Possibly lock up the gun.
|
|
blind
BB Scar Veteran
Posts: 217
|
Post by blind on Feb 7, 2013 15:55:19 GMT -5
yeah i know! and also i know i did lots of reserarch on this gun before getting it but thanks for warning me aswel. but yeah pronly what ill do is drill it a lil bit. hope that works!
|
|
|
Post by Darth on Feb 7, 2013 19:48:16 GMT -5
Are you going to do the charging handle mod?
|
|