|
Post by jackrabbit89 on Apr 4, 2013 8:26:11 GMT -5
ok so i put a tight bore and a g&G green bucking in the ak a while ago and couldnt get it back together for the longest time, well a few days ago i managed to get it all back together and took it out to test fire. im pretty sure i put something in wrong because iv got half the range and accuracy i used to. no matter what i turn the hop up to all my shots fly like a curve-ball. and if i turn the hop up to much it jams the gun. im not the best with the mechanics of airsoft guns. if anyone has any input or thinks they could get the gun to work and has the time to try to fix it, i can pay. i would like to have it for blast camp. but i am not gona try to fix it anymore cus ill am certain i will just mess it up more.
|
|
|
Post by Koyote on Apr 4, 2013 9:05:21 GMT -5
Sounds like your hop up isn't in there straight if your bb's are curving.
|
|
|
Post by jackrabbit89 on Apr 4, 2013 21:12:48 GMT -5
that is what i was thinkin but when i put the hop bucking and barrel in i turned the hop to max and looked down the barrel and i looked pretty straight. but like i said im a noob at stuff like that lol
|
|
|
Post by Slacker - Command on Apr 5, 2013 9:57:44 GMT -5
Did you loose the hopup nub? Is the little peice of plastic pushing up against the rubber visable? Or even there for that matter?
|
|
|
Post by jackrabbit89 on Apr 5, 2013 18:01:00 GMT -5
im positive that is in there. but im gona check anyways because i been wrong before. but i dont know wqt would cause it to jam when you turn it up to about half hop. but any lower then that and all i get is the curveball trajectory.
|
|
rabidgerbil
6mm Magnet
All you truly need to play airsoft is honor, everything else is just toyz.
Posts: 64
|
Post by rabidgerbil on Apr 6, 2013 6:58:57 GMT -5
How hard was the hop-up to put on with the bucking? Was it really tight? Sometimes you can distort the bucking enough to cause alot of issues as well.
|
|
|
Post by jackrabbit89 on Apr 6, 2013 18:54:07 GMT -5
it was kinda tight lol but i figured but it was because alot of the grease got wiped off when i took it out. had to use some silicone lube to get it to go in
|
|