|
Post by branflakes on Jun 17, 2013 11:15:08 GMT -5
I just recently received an aps m4 from the mail. It shot fine the first few times i shot it, then all of a sudden it stops shooting. Any kind of battery i put on it does nothing. Kinda hoping i can get this fixed b4 this sunday
|
|
|
Post by Darth on Jun 17, 2013 11:26:53 GMT -5
Nothing? At all? Could be motor connections. They tend to wiggle loose.
|
|
|
Post by Koyote on Jun 17, 2013 11:28:59 GMT -5
Also make sure your not kinking any wires and check the fuse.
|
|
|
Post by branflakes on Jun 17, 2013 11:56:35 GMT -5
Ok so i took the gun appart down the gear box and lower receiver. Looked at the wires i could see and didnt see much wrong. I didnt want to take much more apart since this being my first time using an m4 or taking 1 apart. Anyone know of a good place that could try and fix it that wouldnt cost as much. Ive been going to the ol ball n chain but they seem to charge alot
|
|
|
Post by branflakes on Jun 17, 2013 12:28:49 GMT -5
Also, im trying to put it back together and im having a little trouble putting the buffer tube back on. The batter goes in it and there is this small grey peice that is supposed to hold the buffer tube in place but im having troubles getting it positioned at the bottom because of the wires.
|
|
|
Post by Darth on Jun 17, 2013 13:36:31 GMT -5
I would take it to cromags
|
|
|
Post by branflakes on Jun 17, 2013 13:49:17 GMT -5
Wheres that?
|
|
|
Post by Darth on Jun 17, 2013 19:31:55 GMT -5
Crazy Cromag's Airsoft emporium. In Huntington. Goggle it for directions.
|
|
|
Post by äà ( DA ) - Command on Jun 17, 2013 20:55:15 GMT -5
You bring it to the field Sunday and I can try it for you
|
|
|
Post by branflakes on Jun 17, 2013 22:26:45 GMT -5
Ok thank you! That would be awsome
|
|